Radwin 2000 C PLUS

RADWIN2000CPlusUserManual Release3.5.70 7‐4
AirInterface(MasterODU‐HBSOnly) Chapter7
AirInterface(MasterODU‐HBSOnly)
TheAirInterfacetaballowsyoutochangealloftheairinterfacesettingchosenduring
activationexcepttheOperatingChannel.
AlloftheeditableparametersareautomaticallyinheritedbytheSlaveODUwhenyouuseOK
orApply.
TheAdvancedbuttonenablestochooseathroughputmode:
ThroughputModedetermineshowtheAdaptiveModulationmechanismworks.Maximum
Throughput(default)shouldbechosenifthroughputismoreimportantthanhigherdelay.
Conversely,ReducedLatencyminimizesdelayattheexpenseoflowerthroughput.
Note
TheonlywaytochangetheOperatingChannelisbydeactivationand
reactivationoftheMasterODU.