Radwin 2000 C PLUS - GSU Installation

RADWIN2000CPlusUserManual Release3.5.70 11‐5
GSUInstallation Chapter11
GSUInstallation
Overview
Figure11‐5:GeneralGSUconfiguration
ItmaybeconfiguredusingtheregularRADWINManagerorTelnet.
PreparingtheGSUforUse
LogontotheunitusingLocalConnectionorIPaddress10.0.0.120tochangeitsIPaddress
fromthedefault(10.0.0.120).Intheexamplescreencapturesbelow,weuse10.104.20.1with
SubnetMask255.255.0.0andGateway10.104.10.21.
MountingtheGSU
MounttheGSUandantenna.EnsurethatitsODUportconnectedtoitsPoEdeviceandthe
HSScableisconnectedtotheHSSunitasshown.TheexternalLANportofthePoEdeviceis
connectedtothemanagingcomputer.IfyouareaccessingtheGSUthroughanetworkitis
essentialthatyouusetheIPpre‐loadingmethod.Thedefault IPaddressmaybeinaccessible
andyoumaynotusetheLocalConnectionmethodoveranetwork.