Radwin 2000 C PLUS

RADWIN2000CPlusUserManual Release3.5.70 5‐6
TheRADWINManagerLog‐onConcept Chapter5
Figure5‐5:Logonwindowexposingtheusertypes.
Therearethreeusertypes:
• AnObserverhasread‐onlyaccesstothesector.AnObservercanmonitorthesector,
generatereports,butmaynotchangeanysectorparameters.
• AnOperatorcaninstallandconfigurethesector.
• AnInstallercan,in
additiontofunctioningasanOperator,alsochangetheoperating
frequencyband(orregulation).Thelatterfunctionhaslegalramifications,requiring
familiaritywithlocalregulations.
YoumaychoosetheSNMPversion.IfyourfirewallblocksSNMPv3messagesandforsecurity
reasonscannotbechangedthemuseSNMPv1.
Ifyouareusing
TrapAuthentication,entertheUserandPassword.Leavingthesefieldsblank
orincorrect,willnotpreventyoufromloggingon.Youwillnotbeabletoseetrapmessages
directedtothetrapmessageaddressassociatedwithadefineduser.Theallocationand
associationofatrapaddresswithauserisdescribedinChapter7,Management.
IfyouareconnectingthroughtheRNMSserverchecktheRNMSconnectbuttonandent er
yourserverIPaddress.