Radwin 2000 C PLUS - Table 13-1 Port Settings - I

RADWIN2000CPlusUserManual Release3.5.70 13‐3
PortFunctionality Chapter13
IngressDirection
Table13‐1:Portsettings‐Ingressdirection
Transparent
Theport‘doesnothing’withregardtoVLANs‐inboundframesareleft
untouched.
Tag
FramesenteringtheHSUportwithoutVLANorQinQtaggingaretaggedwith
VLANIDandPriority
a
,whicharepreconfiguredbytheuser.Frameswhichare
alreadytaggedatingressarenotmodifiedandpassthrough.
a. Priority Code Point (PCP) which refers to the IEEE 802.1p priority. It indicates the frame priority level
from 0 (lowest) to 7 (highest), which can be used to prioritize different classes of traffic (voice, video,
data, etc).
Providertag
FramesenteringtheHSUportaretaggedwithprovider’sVLANIDand
Prioritywhicharepreconfiguredbytheuser.Fr ame.swhicharealready
taggedwithProvidertaggingattheingressarenotmodifiedandpassed
through
.