Radwin 2000 C PLUS User Manual

RADWIN2000CPlusUserManual Release3.5.70 5‐7
Log‐onErrorsandCautions Chapter5
Thefollowingtablesummarizestheseoptions:
TheNetworkManage rshouldchangethedefaultpasswordsassoonaspossi ble, particularly
ifSNMPv3istobeused.
 Continuingthelog‐onprocedure:
5.IfyourUserTypeisnotOperator,thenchooseitnow.
6.Enterthepasswordforyouruser‐type.
7.IfyouareauserwithRead‐Writepermission,clickOptionstoentertheCommunity
optionsifrequired.
Log‐onErrorsandCautions
UnsupportedDevice
AttemptingtoconnecttoanunsupporteddeviceonanotherwisevalidIPaddress(for
example,aLANprinter)willresultinthefollowingerrormessage:
Table5‐2:Usertypes,defaultpasswordsandfunction
UserType
Default
Password
Function
SNMPv1 SNMPv3
Community
Communi
tyString
Password
Default
Value
Observer admin Monitoring Read‐Only public Read‐Only public
Operator admin
Installation,
configuration
Read‐Write netman Read‐Write netman
Installer wireless
Operatorplus
set‐band
Read‐Write netman Read‐Write netman
Note
• LeavethedefaultCommunitypasswords,netmanforread‐write,and
publicforread‐only.
• Ifyouareauserwithread‐onlypermission,thenyoumayonlylogon
asObserver.
• ThetwofieldsserveasSNMPv1CommunitystringsandSNMPv3pass‐
words.

Radwin 2000 C PLUS Specifications

General

Brand	Radwin
Model	2000 C PLUS
Category	Radio
Language	English