Radwin 2000 C PLUS - Figure 18-4 Band Selector

RADWIN2000CPlusUserManual Release3.5.70 18‐7
RunningtheLinkBudgetCalculator Chapter18
Figure18‐4:Bandselector
Forthepurposesofourexample,wewilluse5.8GHzFCC/ICConnectorized.
3.ChoosetheSeries:
4.ChoosethechannelBandwidth:
5.ChoosetherequiredTxPower.UnderAdaptiveRat e,thiswillbetheMaxTxPower
andyoucannotchangeit.
6.Choosetherequiredantennatype‐dualorsingle.Forintegratedproductsthisitem
willbedisabled.
7.Entertheradioparametersforeachsite:
Note
CollocatedODUsuseRFPEsothereisnoHSSentry