Radwin 2000 C PLUS

RADWIN2000CPlusUserManual Release3.5.70 3‐1
Chapter3:
SiteSurvey
PlanningtheLinkSite
Overview
Linksiteplanningconsistsofasetofsurveys,whichmustbecarriedoutbeforeany
equipmentisbroughttothesite.Ifforsomereason,theoutcomeofanyofthesesurveysis
negative,sitere‐locationwillneedtobeconsidered.
ASiteSurveyconsistsofthreestages:
1. Preliminarysurvey‐Theproposedlinkisanalyzedintheofficeusingatopographicmap.
2. Physicalsurvey‐Thelocationsoftheindoorandoutdoorequipmentaredeterminedon‐
site.
3. RadioFrequency(RF)survey‐Itisrecommendedthattheinstallationareabescanned
withaspectrumanalyzer,toidentifyRFinterferencesoastodetermine
a clearchannelfor
radioinstallation(on‐site).
TheSiteSurvey
Introduction
RADWINwirelesslinksmustbeplannedbeforeinstallation.Thedesignatedinstallationsite
mustbeappraisedtodeterminethatthewirelesssystemisabletooperateefficientlyand
provideconnectivitywithoutsignaldegradation.
RADWIN2000CPlusof fersawideoperatingfrequencyrange.Afreefrequencychannelmust
bedeterminedwithintheoperatingrange,foroptimumperformance.