Radwin 2000 C PLUS - Scope of this Chapter; Logging on

RADWIN2000CPlusUserManual Release3.5.70 20‐3
SomeWorkingTips Chapter20
SomeWorkingTips
Youcan:
»LogontoaODUonthedefaultIPaddressof10.0.0.120/8,settheLinkIDandIP
addressinsteadofusingtheRADWINManagerasinChapter5.UnliketheLocalCon‐
nectionmethod,youneedtoresettheODUtoseethechangeintheWebInterface.
» ChangetheoperatingBandforthelinkinsteadofusingtheRADWINManager.You
canrevertitthesamewayorbyadirectconnection,loggedonasInstaller.
»LookatRecentEventsforeithersite
Youcannot:
» ChangedefaultTxPower
»ConfigureSpatialMultiplexing/Diversity
» ManageotherfeaturessuchasGSU(whensupported),VLAN,QoS
»PerformSoftwareupgrade
Beverycareful:
»UsingthistoolifyourlinkisprovidingCustomerServicewhichmaynotbeinterrupted
withsync‐losses
ScopeofthisChapter
Theremainderofthischapterisdividedintothreesections:Loggingon,HBSConfiguration
andHSUConfiguration.
Loggingon
TousetheWebinterface,simplypointyourbrowsertotheIPaddressofthesitetowhichyou
areconnected.