Radwin 2000 C PLUS - Software Upgrade for Gsus

RADWIN2000CPlusUserManual Release3.5.70 11‐16
SoftwareUpgradeforGSUs Chapter11
Theadditionaldisplaycommandsare
displayrfp
Therpfvaluedisplayedisanindexfrom2to6,2forA,3forBandsoon.
displayratio
displaytx_phase
displaygpsinfo
Thelastone,displaygpsinfo,isthemostinteresting:
admin@10.104.20.1‐>displaygpsinfo
CurrentGPStime102941.000
CurrentGPSlatitude51.500000
CurrentGPSN\SIndicatorN
CurrentGPSlongitude0.000000
CurrentGPSE\WIndicatorE
CurrentGPSnumberofsatellites09
CurrentGPSaltitude84.0
Command"displaygpsinfo"finishedOK.
Thethreeadditionalsetcommandsare
setrfp<index>(2‐6)
setratio<ratio>
settx_phase<mode:1=normal,2=shifted>
SoftwareUpgradeforGSUs
AllGSUsinadistributedsitecanbeupdated simultaneously.UseanIPlistasdescribedin
Chapter12.