Radwin 2000 C PLUS - Figure 7-11 Date and Timec; Figure 7-12 Change Date and Figure 7-13 Setting Ethernet

RADWIN2000CPlusUserManual Release3.5.70 7‐15
Management Chapter7
Figure7‐11:DateandTimeConfiguration
3.IfenteringanIPaddressfortheNTPServer,clickClear,andthenenterthenew
address.
4.SetyoursiteOffsetvalueinminutesaheadorbehindGMT
1
.
5.Tomanuallysetthedateandtime,clickChangeandeditthenewvalues.
Figure7‐12:ChangeDateandTime
6.ClickOKtoreturntotheConfigurationdialog.
1. GreenwichMeanTime