Radwin 2000 C PLUS - Page 120

RADWIN2000CPlusUserManual Release3.5.70 7‐16
Management Chapter7
Ethernet
Figure7‐13:SettingEthernetservices
HBSAgingTime
TheHBS(MasterODU)worksinBridgeMode.InBridgemodetheODUperformsboth
learningandaging,forwardingonlyrelevantpacketsoverthesector.Theagingtimeofthe
ODUisbydefault,300seconds.
EthernetPortsConfiguration
TheODUEthernetportmodeisconfigurableforlinespeed(10/100/1000BaseT)andduplex
mode(halforfullduplex).
Linespeed1000BaseTisonlyavailableiftheODUisconnectedtoAGbEPoEdevice.
.
AnAutoDetectfeatureisprovided,wherebythelinespeedandduplexmodearedetected
automaticallyusingauto‐negotiation.Usemanualconfigurationwhenattachedexternal
equipmentdoesnotsupportauto‐negotiation.ThedefaultsettingisAutoDetect.
TheiconnexttotheCRCerrorcountmaybeclickedtoresetthe
countertozero.