Radwin 2000 C PLUS - Figure 9-2 Setting the Upper

RADWIN2000CPlusUserManual Release3.5.70 9‐7
ObtainingReports Chapter9
•Currentgivesyouthelatestentry.
•15Minutesprovidesdatainascrolldownlistin15minuteintervals
•Daily(24hours)showsresultsforthelast30daysatmidnight.
TheThresholdbuttonenablesyoutosettheuppertrafficthresholdsforreporting.Traffic
conditionsabovethethresholdindicatecongestionandprobablylostframes.Thethresholds
aresetseparately foruplinkanddownlink:
Figure9‐2:Settingtheuppertrafficthreshold‐Downlink
Togetdatafordisplay,clickGetData.Theprocessmaytakeafewseconds.
HereisanextractforthedownlinkPerformanceMonitoringreportbasedon15minutes
recording: