Radwin 2000 C PLUS - Page 110

RADWIN2000CPlusUserManual Release3.5.70 7‐6
Management Chapter7
TheExternalPulseswhichmightbedetected,maycomefromacollocatedHBS,aRADWIN
2000CPlusODU,aRADWIN2000ODUoraRADWINGSUconfiguredasHubSyncMaster.To
enableHSS,checktheEnabledcheckbox.
EnsurethatthecorrectOperationalstateisselected‐inourexample,HubSiteClient‐
ContinueTx.ClickApplyorOKtoenableHSS.
SeeChapter10forfurtherdetailaboutHSS.
Management
IPAddresses
WealreadyusedthemanagementtabtosettheIPaddre ssesfortheSlaveODU.Ifyousetthe
IPandrelatedaddressescorrectly,youwillnotneedtochangethemhere.
Note
RADWIN2000CPlusSlaveODUscannotbecollocated.