Radwin 2000 C PLUS - Page 111

RADWIN2000CPlusUserManual Release3.5.70 7‐7
Management Chapter7
TrapDestinations
 TochangeatrapIPaddress:
1.Openanentrywithitseditbutton:
Thefollowingentrywindowisdisplayed:
2.EntertheTrapDest inationIPAddressandPort.ItcouldbetheIPaddressofthe
managingcomputer.Theeventslogwillbestoredattheaddresseschosen.
3.ForSecuritymodelyoumaychoosebetweenSNMPv1orSNMPv3.Thechoiceissite
dependent.IfyouchooseSNMPv1,youmayonlyenteranIPaddressandport
number.ForSNMPv3,youshouldsupplyausernameandpassword: