Radwin 2000 C PLUS - Page 96

RADWIN2000CPlusUserManual Release3.5.70 6‐34
BulkSoftwareBackup Chapter6
Itemsfromthelistcanbeclearedbyselectingthemandthenusingtherightbutton.
TherightbuttoninFigure 6‐22,mayberusetoremoveoneormoreselectedsites.
3.YoumaychoosetheSNMPversionbutprobablyitshouldbebestleftatyourlog‐on
setting.
4.ClicktheStartBackupbutton.Progressbarsindicatebackupstatus.
Thesuccessorfailureofthebackupisdisplayedoncompletion:
Saveconfigurationproducesatextfi leintheformatoftheaboveexampleforbackingupan
installedlink.
Thefilesproducedbytheaboveprocessare:
10.104.4.4_26.02.2014.backup
10.104.4.2_26.02.2014.backup
SoftwareUpgradeConfig_2014_02_26.txt
Noticethatthefilesaredatestamped.Thefirsttwofilesarebinary.Thethirdisthesave‐
configurationtextfile.
Thebackupfilesareidenticalinnamingcon ventionandformattothoseproducedonasite‐
by‐site basisinBackupandRestore.
Note
Abackup(fullorconfiguration)mayberestoredtoanotherODUprovided
thattheproductIDsandrevisionlevelsofthesourceandtargetODUsare
identical.TheyareshownintheODUInventorywindow.