Radwin 5000 HPMP - Page 130

RADWIN5000HPMPUserManual Release3.5.70 6‐18
TheInitialRADWINManagerMainWindow
havingfullyconfiguredthesectoryouwoulddisableallbuttheactualoperating
channel.
11.ClickNext.TheAntennatypeandTxPowerwindowispresented:
ThechoiceofTxPower,antennagainandcableloss(betweentheradioandthe
antenna)determinestheEIRPandisaff ectedbysuchconsiderationsasradiolimita‐
tionsandregulatoryrestrictions.
Beforecompletingantennainstallation,youmightliketoconsiderthebackground
informationaboutsettingantenna parameters,inAppendixE:
ChooseyourAntennaType,RequiredTxPower,AntennaGainandCableLoss.We
willsetRequiredTxPowerto5dBmforourexample.ClickNext.
12.TheSummarywindowoftheWizardisdisplayed.
Note
ForoperationusingLicensed3.XbandsunderFCCpart90subpartZandIC
RSS‐197supporting3.650‐3.700GHz:TheHBSdoesnotcommenceany
typeoftransmissionuntiltheActivationprocessiscompleted,in
compliancewiththoseregulations.
Warning
WhensettingRequiredTxPower,itisyourresponsibilitytochoseavaluein
compliancewithyourlocalregulations.