Radwin 5000 HPMP - Chapter 9: Direct HSU Configuration; Scope of this Chapter; Configuring an HSU

RADWIN5000HPMPUserManual Release3.5.70 9‐1
Chapter9:
DirectHSUConfiguration
ScopeofthisChapter
DirectmanagementofanHSUmaybecarriedoutbyaLANconnectiontoamanaging
computer(on‐site)orover‐the‐air(fromtheHBSsite).
ThereareseveraldifferencesintheconfigurationfunctionalityforadirectlymanagedHSU
comparedtothemethodofChapter8dependingonwhethertheHSUisregisteredtoaHBS,
unregisteredornotamemberofanysector.
WhereconfigurationfunctionisidenticalunderdirectconnectionandthroughtheHBS,we
willnotrepeatthedetails,whichmaybeseeninChapter8.
ConfiguringanHSU
LogontotheHSUeitherdirectlyorover‐the‐airasshowninChapter5.ForaregisteredHSU,
youwillseeadisplaylikethis: