Radwin 5000 HPMP - Antenna Characteristics

RADWIN5000HPMPUserManual Release3.5.70 A‐18
AntennaCharacteristics
Environmental
Safety
EMC
AntennaCharacteristics
Anantennaistheradiatingandreceivingelementfromwhichtheradiosignal,intheformof
RFpower,isradiatedtoitssurroundingsandviceversa.Thetransmissionrangeisafunction
oftheantennagainandtransmittingpower.Thesefactorsarelimitedbycountryregulations.
TheRADWIN5000HPMPmaybeoperatedwithanintegratedantennaattachedtotheODU
unit,orwithanexternalantennawiredtotheODUviaN‐typeconnectors.Allcablesand
connectionsmustbeconnectedcorrectlytoreducelosses.Therequiredantennaimpedance
is50Ω.

Operatingtemperature
‐40°Cto60°C
Storagetemperature
‐50°Cto70°C
Enclosurerating
IP67
Humidity
100%noncondensing
TUV
UL60950‐1,UL60950‐22,CAN/CSAC22.260950‐1,CAN/
CSAC22.260950‐22
ETSI/IEC
EN/IEC60950‐1,EN/IEC60950‐22
FCC
CFR47ClassB,Part15,SubpartB
ETSI
EN300386,EN301489‐4,EN301489‐1
CAN/CSA‐AS/NZS
CISPR22ClassB