Radwin 5000 HPMP - VLAN Configuration Using the RADWIN Manager

RADWIN5000HPMPUserManual Release3.5.70 18‐6
VLANConfigurationUsingtheRADWINManager
EgressDirection
VLANConfigurationUsingtheRADWIN
Manager
ManagementTrafficandEthernetServiceSeparation
YoucandefineaVLANIDformanagementtrafficseparation.Youshouldconfigurethesystem
topreventconflictsasdetailedbelow.
Whenconfiguredforthedefaultoperationalmode,a“Providerport”willhandleingress
trafficasfollows:
• FiltersframesthatarenottaggedwiththeProviderVLANID
• RemovestheProviderdoubletag
Therefore,ifaportisconfiguredformanagementtr afficseparationbyVLANandas‘Provider
port’,thenthereceivedmanagementframesmustbedoubletaggedasfollows:
Table18‐2:Portsettings‐Egressdirection
Transparent
Theport‘doesnothing’withregardtoVLANs‐outboundframesareleft
untouched.
Untagall
PortconfiguredtountaguserVLADtagsforallframes.
Filter
Disclaimer
IfyouarenotaVLANexpert,pleasebeawarethatincorrectVLAN
configurationma ycausehavoconyournetwork.Thefacilitiesdescribed
belowareofferedasaservicetoenableyoutogetbestvaluefromyour
RADWIN5000HPMPlinksandareprovided“asis”.Undernocircumstances
doesRADWINacceptresponsibilityfornetworksystemorfinancial
damagesarisingfromincorrectuseoftheseVLANfacilities.