Radwin 5000 HPMP - Appendix C: MIB Reference; Introduction

RADWIN5000HPMPUserManual Release3.5.70 C‐1
AppendixC:
MIBRef erence
Introduction
AbouttheMIB
TheRADWINMIBisasetofAPIsthatenablesexternalapplicationstocontrolRADWIN
equipment.
TheMIBisdividedintopublicandaprivateAPIgroups:
• Public:RFC‐1213(MIBII)variables,RFC‐1214(MIBII)SystemandInterfacessections
•Private:ControlledbyRADWINandsupplementsthepublicgroup.
ThisappendixdescribesthepublicandprivateMIBusedbyRADWIN.
Terminology
Thefollowingtermsareusedinthisappendix.
Inaddition,theMIBusesinternally,theoldernotionsofLocalsiteandRemotesitewhere
thismanualwouldusesiteAandsiteB.
Toavoidburdeningthereader,thisappendixwillfollowtheMIBusage.
Term Meaning
MIB ManagementInformationBase
API ApplicationProgrammingInterface
SNMP SimpleNetworkManagementProtocol