Radwin 5000 HPMP - Figure 5-5 Extended Log - on; Figure 5-6 Log on Window

RADWIN5000HPMPUserManual Release3.5.70 5‐9
TheRADWINManagerLog‐onConcept
Figure5‐5:Extendedlog‐onwindow
AttheUserTypefield,clickthelistbutton:
Figure5‐6:Logonwindowexposingtheusertypes.
Therearethreeusertypes:
• AnObserverhasread‐onlyaccesstothesector.AnObservercanmonitorthesector,
generatereports,butmaynotchangeanysectorparameters.
• AnOperatorcaninstallandconfigurethesector.
• AnInstallercan,inadditiontofunctioningasanOperator,alsochangetheopera ting
frequencyband(orregulation).Thelatterfunctionhaslegalramifications,requiring
familiaritywithlocalregulations.
TosettheSNMPversion,usetheSettingsbuttoninFigure 5‐
5.Alog‐onextensionwindow
opens: