Radwin 5000 HPMP - Figure 23-5 Band Selector

RADWIN5000HPMPUserManual Release3.5.70 23‐7
RunningtheLinkBudgetCalculator
Figure23‐5:Bandselector
Forthepurposesofourexample,wewilluse5.730‐5.845GHzFCC/ICConnectorized.
3.Entertheradiodetails.
TheFademarginistheminimumrequiredforline‐of‐sight(LOS)conditions.For
degradedlinkconditions,alargerFademarginshouldbeused.
TheEIRPisgivenindBmandWatts.
4.TheRateitemmaybeusedforcalculatingtheLinkBudgetunderbestandworst
scenarios.Inpractice,HBSsareconfiguredforAdaptiveratewhichmaynotbe
disabled.
5.Iftherequiredrangebetweenthetwolinksitesisknown,youmayenteritdirectly.
Alternatively,youmayenterthelatitudeandlongitudeofeachsiteinthelink,in
whichcasethedistancebetweenthemwillbecalculatedanddisplayed.
Note
• Thisreleasesupports5/10/20/40MHzChannelBandwidths
• CollocatedHBSsuseRFPEsothereisnoHSSentry