Radwin 5000 HPMP - Commissioning and Installation

RADWIN5000HPMPUserManual Release3.5.70 16‐3
CommissioningandInstallation
• 1xRFCable,1.5m
• RADWINManagersuppliedeitheronCDorbyelectronicmeans
CommissioningandInstallation
PreparingtheGSUforUse
Atthedepot,logontotheunitusingLocalConnectionorIPaddress10.0.0.120tochangeits
IPaddressfromthedefault(10.0.0.120).ThemethodisthesameasisusedforanHBS.Inthe
examplescreencapturesbelow,weuse10.104.20.1withSubnetMask255.255.0.0and
Gateway10.104.10.21.
GSUInstallation
TheGSUlookslikeasmallformfactorODU.MountingtheGSUfollowsthestandardpattern.
TheGPSantennaismountedoutsideonawallorpole.
ConfiguringtheGSU
GettingStarted
ToconfiguretheGSU,youlogontoit,exactlyasinGettingStartedwiththeRADWIN
Manager.
TheGSUMainWindow
HereisthemainwindowforGSUconfiguration: