Radwin 5000 HPMP - Configuring False Radar Mitigation; Figure 19-1 False Radarm

RADWIN5000HPMPUserManual Release3.5.70 19‐2
ConfiguringFalseRadarMitigation
2. Eliminationofdetectionofspecificfalseradartypesbyblockingdetectionoffalseradars
ofaspecifictype.Therearethreetypesofradars:
•Fixed:Falseradarswithfixedpulsewidthhavingfixedrepetitionfrequency
•Variable:Falseradarswithvariablepulsewidthhavingvariablerepetitionfrequency
•Staggered:Falseradarswithvariablerepetitionfrequencywithinaburstperiod
(Appliesto5.4GHzETSIonly)
ConfiguringFalseRadarMitigation
TheconfigurationmethodfortheHBS(ETSIandFCC/IC)isthesameasfortheHSUs(ETSI
only).WewilldemonstratetheHBSforasectorusingthe5.3GHzFCC/ICband:
 ToconfigureFalseRadarMitigation:
1.LogontotheHBSasInstaller.
2.EntertheConfigurationwindowandopentheAdvancedtab.
Figure19‐1:FalseRadarMitigation