Radwin 5000 HPMP - Preparing the HBS; Figure 11-1 Mobile Hbs after

RADWIN5000HPMPUserManual Release3.5.70 11‐3
PreparingtheHBS
TheTableviewafterloggingontotheHBSlookslikethis:
Figure11‐1:MobileHBSafterinitiallog‐on
YouactivatetheHBSintheusualway.Beawarethatuseoffixedversusautomaticchannel
selectionispartofyourRFplanning.
Wewillmaintainthenamingschemeused
inearlierchapters,butourHSUswillhavenames
likeHMU.01.01andsoon(insteadofHFUandHNUforfixesandnomadictypes).The
activation wizardpagesareidenticaltothoseusedforafixedsector.
Thefirstdifferencebetweenanewactivatedmobileandfixedsectoristhatthe
HSUsdonot
appearintheTableview.
PreparingtheHBS
OpentheConfigurationwindowandthentheMobilitytab: