Radwin 5000 HPMP - Checking the GPS

RADWIN5000HPMPUserManual Release3.5.70 11‐27
ConfirmingthePre‐Configuration
Yourbrowsermaybecomeinactive,sincethereisnolongeranover‐the‐airconnection.
ConfirmingthePre‐Configuration
Toconfirmourworksofar,wemustconnecttheVMUunittoaDHCPserver,andthenaccess
eachoftheVAPsfromaremotelaptop.
CheckingtheGPS
ThefrontpaneloftheVMUhasaGPSstatusLED.TheGPSunitisfunctioningcorrectlywhen
theLEDissteadygreen.Otherconditionsareasfo llows:
TheGPSdataaredisplayedontheVMUmainwindowstatusarea:
TheGPSdatamayalsobeviewedintheVMUWebInterface,whichinaddition,offersa
GoogleEarthmapcenteredonthecurrentlocation.SeeWEBInterfaceforVMUs.
Table11‐1:GPSStatusLEDs
LEDStatus GPSStatus
Red Disconnected
Amber Connected,nosatellitesavailable(usuallywhenindoors)
Green,blinking Connected,searching
Green Connected,satellitefound