Radwin 5000 HPMP - HSU Connection Table

RADWIN5000HPMPUserManual Release3.5.70 8‐30
Advanced:FalseRadarMitigationforHBS
LicenseActivation
YoumayaddadditionalbandsorcapacityusingthelicenseActivationfacility.Additional
bands(ifavailable)areobtainedusingtheChangeBandfunction,describedbelow.Capacity
upgradeisdescribedinChapter22.
Forasingleband,justenterthesuppliedlicenseKeyandclickActivate.Ifyouhavealist of
them(atextfile)youwillneedtousetheLicenseFileoption.
InsomeinstancesitmayinvolvepurchasingtherelevantlicensefromRADWIN.Youshould
contactCustomerServicefordetails.Youwillfindthetechnicalstepsrequiredtoobtainand
installextrabandsonpage 8‐51.
Advanced:FalseRadarMitigationforHBS
Thistabisonlyvisibleif
• YouareusingaRegulationrequiringRadarChannelAvoidanceand
• YouareloggedonasInstaller
Forthisrelease,thisfeatureattheHBS,isonlyrelevanttothe5.3GHzETSIband.
ConfigurationofFalseRadarMitigationiscoveredinChapter19.
HSUConnectionTable
FromtheHBSbuttonbar,clicktherighthandbuttonfollowedbyHSUConnectionTable.
Thefollowingtableisdisplayed: