Radwin 5000 HPMP - Saving the HBS Settings for Reuse as a Template; Creating a Sector from an HBS Template

RADWIN5000HPMPUserManual Release3.5.70 11‐15
SavingtheHBSSettingsforReuseasaTemplate
Theallocatedpercentageofuplinktimeslotshasincreasedfrom29%to38%.
SavingtheHBSSettingsforReuseasa
Template
RefertoFigure 11‐2ofwhichthefollowingisanexcerpt:
Followinganyfurtherfinetuning,openuptheHBSMobilitytab,andclickSave.Youare 
offeredthestandardSaveFiledialog.SavetheHBSMobilitysettingsfile
(MobilitySettings.mob)toaconvenientlocation.
CreatingaSectorfromanHBSTemplate
Thesavedsettingsfilemaybeusedasatemplateforfurthersectors.
 TocreateasectorfromaHBSMobilitysettingsfile:
1.StartingwithanewHBSandHSUs,logontotheHBS.
2.ActivatetheHBSintheusualwa y.
3.OpentheMobilitytabintheConfigurationwindow.IntheSave/UploadSettings
window,clickUpload.