Radwin 5000 HPMP - FCC;IC Requirements

RADWIN5000HPMPUserManual Release3.5.70 19‐3
FCC/ICRequirements
3.TheDFSFrequencyStatusTableatthebottomofFigure 19‐1showsthetime,type
andfrequencyofthelastradarsdetected.Thistableshouldbeusedtoselectthe
best option(s)toreduceoreliminatefalseradardetectionwithoutcompletely
blockingoutrealradardetection.
4.Checkthemitigationfeaturestobeused.
5.Whenyouaresatisfiedwithyourconfigurationparameters,clickOKtosavethem
anddismisstheConfigurationwindow.
FCC/ICRequirements
TheFCCrequiresthatdevicesinstalledwithin35kmofanyTerminalDopplerWeatherRadars
(TDWR)locationshouldberegisteredinthevoluntaryWISPAsponsoreddatabase.For
convenience,wesupplyguidelinesaboutthewaythisisdoneinChapter20.