Radwin 5000 HPMP - Replacing an HSU

RADWIN5000HPMPUserManual Release3.5.70 8‐44
ReplacinganHSU
ConfigurationofFalseRadarMitigationiscoveredinChapter19.
ReplacinganHSU
AdefectiveHSUmaybereplacedbyanotherHSUbelongingtothe sectorprovidedthatthe
replacementisnotregistered.Hereisatypicalscenario:
Figure8‐21:Unit10.104.50.1down;unit10.104.50.3available,notregistered
Sincethereplacementprocedureisaratherdelicateprocess,wewillstepthroughitwitha
detailedexamplebasedonthescenarioinFigure 8‐21.
 ToreplaceadefectiveHSU:
1.Rightclickthedefectiveunitforitscontextmenu:
Ithasanewitem:Replace.
2.ClickReplace.YourareofferedalistofHSUsavailableasreplacements.Inour
examplethereisone:10.104.50.3