Radwin 5000 HPMP - Deregistering an HSU; Where Has My HSU Gone; Saving the HBS Settings for Reuse as a Template; Creating Nomadic Entries for a Sector from a HBS Template

RADWIN5000HPMPUserManual Release3.5.70 6‐37
DeregisteringanHSU
DeregisteringanHSU
AHSUmaybederegisteredbyusingtheDeregisterentryinanHSUcontextmenuorusingthe
buttonfromanHSUbuttonbar.
WherehasmyHSUgone?
SupposethatyouinstalledtwocollocatedHBSswithcontiguoussectors.Itispossiblethatan
HSUlocatedclosetothecommonsectorboundarymay“discover”thewrongHBS.AHSUcan
be“forced”acrosstoanotherHBSbychangingitsSectorIDtothatoftherequiredHBS.The
methodfordoingthisiscoveredinChapt er9.
SavingtheHBSSettingsforReuseasa
Template
RefertoFigure 6‐9ofwhichthefollowingisanexcerpt:
Followinganyfurtherfinetuning,openuptheHBSNomadictab,andclickSave.Youare
offeredthestandardSaveFiledialog.SavetheHBSNomadicsettingsfi le
(MobilitySettings.mob)toaconvenientlocation.Forourexamplewechangedthefile
name
toNomadicSettings.mob.
CreatingNomadicEntriesforaSectorfroma
HBSTemplate
Thesavedsettingsfilemaybeusedasatemplateforfurthersectors.
 TocreateasectorfromaHBSNomadicsettingsfile:
1.StartingwithanewHBSandHSUs,logontotheHBS.
2.ActivatetheHBSintheusualwa y.
3.OpentheNomadictabintheConfigurationwindow.IntheSave/UploadSettings
window,clickUpload.*