Radwin 5000 HPMP - Figure 4-25 Flat Panel Antenna Mounting Kit Adapter; Figure 4-26 Flat

RADWIN5000HPMPUserManual Release3.5.70 4‐18
InstallingtheBaseStation

Figure4‐25:Flatpanelantennamountingkitadapter
ItismountedonapoleinthesamemannerastheHBSitselfusingtheadaptershownin
Figure 4‐25.Thelefthandviewinshowstheknurledsurfaceadjacenttothemountingkitear.
Therighthandviewshowstherecessforthemountingkitholdingnut.
Figure4‐26:FlatPanelantenna‐rearwithmountingkitadapt e r
GroundinganHBSexternalantenna
ExternalantennasshouldbeindividuallygroundedusingasuitableGroundingKitsuchasan
AndrewType223158‐2(http://www.commscope.com).
GroundingtheHBS
ThereisagroundinglugontherearoftheHBSasshowninFigure 4‐27.Connectittoground
using10AWGwire.Groundingisoftencarriedoutinconjunctionwithlightningprotection.