Radwin 5000 HPMP - Upgrading an Installed Sector; Figure 17-1 Software Upgrade; Figure 17-2 Add; Remove Site

RADWIN5000HPMPUserManual Release3.5.70 17‐2
UpgradinganInstalledSector
UpgradinganInstalledSector
 Toupgradesoftwareforalink:
1.IntheRADWINManager,clicktheSoftwareUpgradebutton.Thefollowingdetached
windowappears:
Figure17‐1:SoftwareUpgradeUtility‐Mainwindow
ThedefaultsitesshownintheSoftwareUpgradelistpanelbelongtothecurrently
installedsector.ThelistmaybeemptyifyouarerunningtheRADWINManager
“offline”.
2.TheSoftwareupgradelisttitlebarhasthreebuttonsontherighthandside.
Figure17‐2:Add/Removesitebuttons
TheleftbuttonopensupaWindowsfiledialogtolocatealistoflocationstoupdate.
Thelisthasthefollowingformat:
<IPaddress>,<Read‐Onlycommunity>,<Read‐Writecommunity>
Forexample:
10.104.50.200,netman
10.104.50.4,netman
10.104.50.2,netman
10.104.50.1,netman
10.104.50.3,netman