Radwin 5000 HPMP - Figure 4-36 Pole Clamps for External Antennas

RADWIN5000HPMPUserManual Release3.5.70 4‐27
InstallingFixedSubscriberUnits

Figure4‐36:Poleclampsforexternalantennas
GroundinganHSUexternalantenna
ExternalantennasshouldbeindividuallygroundedusingasuitableGroundingKitsuchasan
AndrewType223158‐2(http://www.commscope.com).Thesameconsiderationsasforthe
HBSantenna sapplyhere.
GroundingtheHSU
AllHSUshaveagroundinglugasshowninFigure 4‐37.Connectittogroundusing10AWG
wire.Groundingisoftencarriedoutinconjunctionwithlightningprotection.

Figure4‐37:HSU:Groundinglugstandardandsmallformfactor
InstallingaPoEdevice
ThesameconsiderationsasforanHBSholdfortheHSUs.
Warning
Donotstandinfrontofaliveantenna.