Radwin 5000 HPMP - Figure 5-7 Log on Window

RADWIN5000HPMPUserManual Release3.5.70 5‐10
TheRADWINManagerLog‐onConcept
Figure5‐7:LogonwindowshowingSNMPsettings.
YoumaychoosetheSNMPversion.IfyourfirewallblocksSNMPv3messagesandforsecurity
reasonscannotbechangedthemuseSNMPv1.
IfyouareusingTrapAuthentication,entertheUserandPassword.Leavingthesefieldsblank
orincorrect,willnotpreventyoufromloggingon.Youwillnotbeabletoseetrapmessages
directedtothetrapmessageaddressassociatedwithadefineduser.Theallocationand
associationofatrapaddresswithauserisdescribedinChapter8,Management.
IfyouareconnectingthroughtheRNMSservercheck
theRMNSconnectbuttonandenter
yourserverIPaddress.
Thefollowingtablesummarizestheseoptions:
Table5‐6:Usertypes,defaultpasswordsandfunction
UserType
Default
Password
Function
SNMPv1 SNMPv3
Community
Communi
tyString
Password
Default
Value
Observer admin Monitoring Read‐Only public Read‐Only public
Operator admin
Installation,
configuration
Read‐Write netman Read‐Write netman
Installer wireless
Operatorplus
set‐band
Read‐Write netman Read‐Write netman