Radwin 5000 HPMP - Figure 5-20 Sector Status; Figure 5-21 Base Station Detail

RADWIN5000HPMPUserManual Release3.5.70 5‐25
SectorStatusPanel
SectorStatusPanel
Thesectorlevelinformationisshownhere.Thereisnothingthatcanbechangedforanactive
sector.Theparametersaresetbeforethebasestationisactivatedandareduplicatedforeach
HSUinthesector.
Figure5‐20:SectorStatuspanel
Thelasttwoitemsareofspecialinterest:TheStatus(shownasActive)indicateswhetherthe
HBShasbeenactivatedornot.TheTimeSlotsbarsindicatehowmanyoutof63timeslotsin
uplinkanddownlinkdirections,havebeenallocatedtoHSUs.Allocationoftimeslots
betweenHSUsprovidesabasicformofprioritizationbetweenthem.Normallyyouwouldnot
leaveunallocatedtimeslotsunlessyouinte ndedtoaddmoreHSUs.EveryHSUrequiresat
leastonetimeslot.TimeslotallocationiscloselyrelatedtoSBMperformancedetailedin
Chapter10.
BaseStationPanel
ThedisplayeditemsintheBaseStationpanelarestraightforward.
Figure5‐21:BaseStationdetailPanel
TheTxRatioshowstheallocationofthroughputbetweendownlinkanduplinktrafficatthe
HBS.Hereitissetto70%downlinkand30%uplink.TheTxRatioisnotonlysector‐wide:If
youuseHSS(Chapter13‐Chapter15)tocollocatedsever alHBSs(tocoveradjacentsectors),
theymustallusethesameTxRatio.