Radwin 5000 HPMP - Chapter 21: Quality of Service; Prerequisites; Qos - Overview; Setting up Qos

RADWIN5000HPMPUserManual Release3.5.70 21‐1
Chapter21:
QualityofService
Prerequisites
TousethefacilityyoumustbefamiliarwiththeuseofVLAN(802.1p)orDiffserv.
QoS‐Overview
QoSisatechniqueforprioritizationofnetworktrafficpacketsduringcongestion.
RADWIN5000sectorssupporttwoclassificationcriteria,VLANbasedorDiffservbased.You
maychoosewhichofthemtouse.
Basedupontheclassificationcriterionchosen,receivedpacketswillbemappedintooneof
fourqualitygroups:Realtime,Nearrealtime,ControlledloadandBesteffort.
Youmaypartition thetotallinkcapacityacrossthefourQualityqueues.Thedefaultweights
aspercentagesareshowninTable 21‐1.
SettingupQoS
QoSforRADWIN5000issetupintwophases:
Table21‐1:DefaultprioritiesandallocationbyVLANIDandDiffserv
Qualityqueue
Priority
Diffserv VLAN
Realtime
48‐63 6‐7
Nearrealtime(responsive
applications)
32‐47 4‐5
Controlledload
16‐31 2‐3
Besteffort
0‐15 0‐1