Radwin 5000 HPMP - Page 151

RADWIN5000HPMPUserManual Release3.5.70 6‐39
CreatingNomadicEntriesforaSectorfromaHBSTemplate
 TocreateasectorfromaHBSIPlistandaNomadicsettingsfile:
1.InthewindowofFigure 6‐12,enteraHBSlistfile.Theformatofthefileislinesof
<IPaddress><Read‐Writecommunity>
Forexample,
10.104.50.200netman
AlloftheHBSsneedtoactivatedandaccessible(viaaswitch)tothemanagingcom‐
puter.Theyneednotbeonthesamesub‐net.
Alternatively,enterthemonebyoneusingthePlusbutton.
Anyun‐activatedHBSswillbeshownasunavailable:
2.MakeanyfurtherchangestothedisplayedlistusingthePlus/Minusbuttons.
3.ClickStarttocommencetheprocess.
4.ThelistwindowwillindicatethesuccessorotherwiseoftheuploadforeachHBS.