Radwin 5000 HPMP - Page 220

RADWIN5000HPMPUserManual Release3.5.70 9‐5
AirInterface
ForaregisteredHSUthiswindowisforinformationonly.Foranunregisteredor
unsynchronizedfixedHSU,theSectorIDfieldwill beblankorthelastSectorIDusedand
editableandtheChannelBandwidthfieldwillbesettodefaultandactive:
Figure9‐5:HSUConfig.‐AirInterfaceforstand‐alonefixedHSU
ForanomadicHSUoraHMU,theAirInterfacedisplayisdifferent.First,theSectorIDis
replacedbytheNetworkID.ForaregisteredHSU,neithertheNetworkIDorCBWcanbe
touched:
Figure9‐6:HSUConfig.‐AirInterface,registerednomadicHSUorHMU
ForanunregisteredorunsynchronizedHSU,youmayeditbothofthesefields:
Figure9‐7:HSUConfig.‐AirInterface,stand‐alonenomadicHSUorHMU
UsethisfeaturetoswitchanomadicHSUorHMUtoadifferentnetwork.