R&S NRP2 - Page 112

Instrument Functions
R&S
®
NRP2
94User Manual 1173.9157.02 ─ 03
"D&A"
The hybrid digital & analog display mode shows the measured value
on an analog scale and numerically.
"Graph"
In the graphical display mode, the power meter displays the envelope
power as a function of time or in its distribution and distribution density
function (CCDF, CDF, PDF). Additional information on the active set-
tings is below the graph in the info panel.
See chapter 4.5, "Displaying traces", on page 112
In halfsize representation, selected measurement values are indicated
on the left side of the graph.
SCPI command:
DISPlay[:WINDow]<[1]..4>:FORMat on page 240
4.3.3.4 Configuring the result display
Each of the display modes is configured individually.
Displaying measurement results