R&S SMA100A - Instrument Information; Instrument State; Level Correction

HP8373 emulation mode
1GP71_0E 100 Rohde & Schwarz
Status Command / Function / Remark / Limitation
[SOURce[1]:]FREQuency[:CW | :FIXed]:STEP[:INCRement] value
Set / Query the rf carrier frequency step size.
Value:
Fmin … FMax [HZ | KHZ | MHZ | MHZ | GHZ] | MINimum | MAXimum | DEFault
Default:
-
Remark:
MINimum, MAXimum, DEFault are not supported.
[SOURce[1]:]FREQuency:MULTiplier value
Value:
1.0 … 100.0 | UP | DOWN | MINimum | MAXimum | DEFault
Default:
1.0
Remark:
UP, DOWN, MINimum, MAXimum, DEFault are not supported.
[SOURce[1]:]FREQuency:MULTiplier:STEP[:INCRement] value
Table 93: Carrier commands
• Instrument information
Status Command / Function / Remark / Limitation
OUTPut:IMPedance? value
[SOURce[1]:]ROSCillator:SOURce?
Query the source of the synthesizer toimebase reference
SYSTem:ERRor?
Query and clear the oldest error number and error description
Remark:
Returns in error in the SM* naming convention
SYSTem:VERSion?
Query the SCPI version number that the instruments supports.
Table 94: Instrument information commands
• Instrument state
Status Command / Function / Remark / Limitation
MEMory:RAM:INITialize[:ALL]
SYSTem:PRESet
Table 95: Instrument information commands
• Level correction
Status Command / Function / Remark / Limitation