R&S SMA100A - Modulation Control; Frequency Modulation

AF2040 emulation mode
1GP71_0E 20 Rohde & Schwarz
Status Command / Function / Remark / Limitation
MODE value
Set modulation mode.
Value:
Combinations of AM, AM1, AM2, FM, FM1, FM2, PM, PM1, PM2, WBFM, PULSE,
SDM, DDM, VOR, ILS, DME
Default:
FM
Remark:
Only the following mode combinations are supported:
AM1
FM1
PM1
PULSE
AM1, AM2
FM1, FM2
PM1, PM2
AM1, FM1
AM1, PM1
PULSE,FM1
PULSE,PM1
PULSE, FM1, FM2
PULSE, PM1, PM2
MODE?
Query informations on modulation mode settings.
Table 12: Modulation mode
• Modulation Control
Status Command / Function / Remark / Limitation
MOD:ON
Turn modulation globally on
MOD:OFF
Turn modulation globally off.
MOD?
Query informations modulation control settings.
Table 13: Modulation control
• Frequency Modulation
Status Command / Function / Remark / Limitation