R&S SMA100A - Display Subsystem; Initiate Subsystem; Output Subsystem

AN680XX emulation mode
1GP71_0E 44 Rohde & Schwarz
Status Command / Function / Remark / Limitation
DIAGnostic:SNUM?
Query the serial number of the instrument.
Remark:
SN1234567890 is returned so far.
Table 39: DIAGNOSTIC subsystem
• DISPlay Subsystem
Status Command / Function / Remark / Limitation
DISPlay[:WINDow]:TEXT:STATe value
Set / Query the state of the parameter display at the front panel.
Value:
ON | OFF | 1 | 0
Default:
ON
Remark:
ON activates screen saver.
OFF deactivates screen saver.
Table 40: DISPLAY subsystem
• INITiate Subsystem
Status Command / Function / Remark / Limitation
INITiate[:IMMediate]
INITiate:CONTinous value
Table 41: INITIATE subsystem
• OUTPut Subsystem
Status Command / Function / Remark / Limitation
OUTPut[:STATe] value
Set / Query the state of the RF output.
Value:
ON | OFF | 1 | 0
Default:
OFF
OUTPut:IMPedance?
Query the impedance of the RF output.
OUTPut:PROTection value
OUTPut:PROTection:RETRace value
Table 42: OUTPUT subsystem