EasyManua.ls Logo

R&S SMA100A - Memory Erase; Sweep Operation

R&S SMA100A
176 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AF2040 emulation mode
1GP71_0E 31 Rohde & Schwarz
Status Command / Function / Remark / Limitation
RCL:CFRQ value
Carrier frequency recall.
Value:
0 99
Remark:
Storage registers are not persisent and lost on power down and reset operations.
RCL:SEQT value
Sequenital tones recall.
Value:
0 19
Remark:
Storage registers are not persisent and lost on power down and reset operations.
RCL:SWEEP value
Sweep recall.
Value:
0 19
Remark:
Storage registers are not persisent and lost on power down and reset operations.
Table 26: Memory Recall
Memory Erase
Status Command / Function / Remark / Limitation
ERASE:FULL
Erase all full stores.
ERASE:PART
Erase all partial stores.
ERASE:CFRQ
Erase all carrier frequency stores.
ERASE:SEQT
Erase all sequenital tones stores.
ERASE:SWEEP
Erase all sweep stores.
ERASE:ALL
Erase all stores.
Table 27: Memory Erase
Sweep Operation
Status Command / Function / Remark / Limitation
SWEEP:MKRON
SWEEP:MKROFF

Table of Contents