R&S SMA100A - Status Reporting

AF2040 emulation mode
1GP71_0E 40 Rohde & Schwarz
INC = 1.0 kHz
SIN
LF MON
ON
LFGF VALUE = 1.0 kHz
INC = 1.0 kHz
SIN
LFGL VALUE = 0.0 V
INC = 1.0 DB
ON
SWEEP RESET
TYPE =CFRQ
MODE = SNGL
START = 100.0 MHz
STOP = 1.35 GHz
TIME = 50 ms
STEP = 250
Table 34: Factory default settings
Status reporting
The SM* does not provide status informations in the STATus-Subsystem.
Therefore the Status reporting is supported by dummy commands and queries.