R&S SMA100A - Sweep

HP8662 emulation mode
1GP71_0E 154 Rohde & Schwarz
MV
Level mV
UV
Level uV
PC
Relative unit %
HZ
Frequency unit Hz
KZ
Frequency unit KHz
MZ
Frequency unit MHz
GZ
Frequency unit GHz
Table 154: Units
• Sweep
Status Command / Function / Remark / Limitation
W1
Set sweep operation off.
Remark:
Rf carrier sweep is supported.
Modulation sweep (Lf sweep) is not supported so far.
Special Functions 40 and 41 have no effect.
W2
Set sweep operation on and select sweep mode AUTO.
Remark:
Rf carrier sweep is supported.
Modulation sweep (Lf sweep) is not supported so far.
Special Functions 40 and 41 have no effect.
W3
Set sweep operation on and select sweep mode MANUAL.
Remark:
Rf carrier sweep is supported.
Modulation sweep (Lf sweep) is not supported so far.
Special Functions 40 and 41 have no effect.
W4
Set sweep operation on and select sweep mode SINGLE.
Remark:
Rf carrier sweep is supported.
Modulation sweep (Lf sweep) is not supported so far.
Special Functions 40 and 41 have no effect.