R&S SMA100A - Status Reporting

RC3102 emulation mode
1GP71_0E 173 Rohde & Schwarz
FREQUENCY = 400.0 HZ
MODULATION (FM) DEVIATION = 0.0 KHZ
SOURCE = INTERNAL
STATE = OFF, SELECTED
FREQUENCY = 400.0 HZ
MODULATION (PHASE) DEVIATION = 0.0 RAD
SOURCE = INTERNAL
STATE = OFF, DESELECTED
FREQUENCY = 400.0 HZ
INCREMENTS USER DEFINED STEP SIZE
Table 166: Factory default setting
Additionally, all (backup) registers 0 … 99 are preset to the factory defaults,
too.
Status reporting
Status reporting is not supported so far.