R&S SMA100A - CTCSS Tones Edit; Sequential Tones

AF2040 emulation mode
1GP71_0E 26 Rohde & Schwarz
Status Command / Function / Remark / Limitation
{INTF1 | INTF2 | INTF3 | INTF4 |INTF5 | INTF6}:XFER
Treat current setting to be the new original setting.
{INTF1 | INTF2 | INTF3 | INTF4 |INTF5 | INTF6}:PHASE value
{INTF1 | INTF2 | INTF3 | INTF4 |INTF5 | INTF6}:CTC1 value
{INTF1 | INTF2 | INTF3 | INTF4 |INTF5 | INTF6}:CTC2 value
{INTF1 | INTF2 | INTF3 | INTF4 |INTF5 | INTF6}:USER value
{INTF1 | INTF2 | INTF3 | INTF4 |INTF5 | INTF6}:TEMP value
{INTF1 | INTF2 | INTF3 | INTF4 |INTF5 | INTF6}?
Query informations on modulation oscillator settings.
Table 19: Modulation frequency
• CTCSS Tones Edit
Status Command / Function / Remark / Limitation
CTONES:EDIT:TNUM value
CTONES:EDIT:TFRQ value
CTONES:EDIT:LOAD value
CTONES:EDIT:SAVE
CTONES?
CTONES:EDIT?
Table 20: CTCSS Tones Edit
• Sequential Tones
Status Command / Function / Remark / Limitation
SEQT:SEQ value
SEQT:DUR value
SEQT:SEND value
SEQT:STOP
SEQT:MODE:STD value
SEQT:MODE:MOD value
SEQT:PARAM:EXTD value
SEQT:PARAM:SDLY value
SEQT:PARAM:SHFT value
SEQT:PARAM:RPTT value