AN680XX emulation mode
1GP71_0E 42 Rohde & Schwarz
Status Function Function / Remark / Limitation
DCL Device clear.
GET Goup execute trigger.
GTL Goto local mode.
IFC Interface clear.
LLO Local lockout.
PPC Parallel-Poll configure.
PPU Parallel-Poll unconfigure.
REN Goto remote mode.
SDC Selective device clear.
SPD Serial-Poll disable.
SPE Serial Poll enable.
SRQ Request service.
Table 35: GPIB functions
Commands
The following table shows the commands, supported by the AN680XX.
• Common
Status Command / Function / Remark / Limitation
*CLS
Clear the status register.
*ESE value
Set / Query the bits of the extended status enable register.
*ESR?
Query the bits of the extended status register.
*IDN?
Query the ID string.
Remark:
ID string has to be provided in frontpanel so far.
*OPC
*OPC?
Wait / Query for completion of command.
*OPT?
Query the instrument options.
To Next Page
Loading...