R&S SMA100A - Additional; Instrument Mode; Carrier Frequency

AF2040 emulation mode
1GP71_0E 16 Rohde & Schwarz
Status Command / Function / Remark / Limitation
*SRE value
Set / Query the bits of the service request enable register.
*STB?
Query the bits of the status byte.
*TRG
Executes a trigger function
*TST?
Perform a setf test and return the test result.
Format “0” = OK
*WAI
Wait for completion of pending operations.
Table 7: Common commands
• Additional
Status Command / Function / Remark / Limitation
EX
Return to SCPI mode.
Remark:
This command has been added to the AF2040 command set.
Table 8: Additional commands
• Instrument Mode
Status Command / Function / Remark / Limitation
IMODE value
Select instrument mode.
Value:
NORMAL | NOISE1 | NOISE2 | SWEEPER
Default:
NORMAL
Remark:
NOISE1, NOISE2 are not supported.
Table 9: Instrument mode
• Carrier Frequency
Status Command / Function / Remark / Limitation